Short take-off and landing

Because the pace of work this winter was slow due to my occupation and some prolonged and poorly timed (from my point of view) winter weather, we are staying "on the hard" for a year.
The decision to leave the boat on land is in order to do things like pull out the tanks, pull the prop, get lots of welding done and to rebuilt the aft cabin.

So on Saturday, May 2, instead of getting launched with the other 200-plus yachts in my club, I drove a powerboat on "safety patrol", in case someone fell off the seawall into the short channel that links Toronto Harbour with Lake Ontario, and then I got called to help move my boat. Did I help? I pushed the cradle a bit, but the 100-foot tall crane did all the work!

It took a little fine-tuning, but we put her down easily, and my stern has plenty of space in which to remove the rudder, pull the shaft and other manly tasks. You can find me in the yard...just follow the swearing that has an echo.

I'm very privileged to have access to a second boat for those days when it's just too nice to rustproof steel or figure out polarity...so I will get out sailing this summer. There's also a 10 foot nesting dinghy that requires multiple falling-out-ofs ... once the water is warmer.

Now I have to figure out how to get enough electricity aboard to keep the fridge running. I'm a simple man, not a barbarian.

Does a skipper need to be a handyman?

Most sailors do their own maintenance and repair. This is usually because it is quicker and certainly cheaper to do boat jobs oneself, and the quality of hired help can be variable, to say the least. Another reason is that the sailing life, even that lived only after work or on weekends, favours the self-reliant person who fancies him or herself a jack of all trades. It's part of the independent-minded ethos of sailing, even though there are plenty of perfectly skilled sailors with more cash than me who happily delegate most maintenance jobs to a cadre of boat-fixing retainers.



If you are planning long-term cruising, however, having Joe Boat Mechanic on speed dial isn't feasible unless you're bringing him and 400 kilos of tools and spares along. If you don't know how to do basic maintenance, you're going to have a very expensive, and a possibly shortened and even a dangerous cruise.



I didn't grow up around boats, as my father stopped being a professional sailor (12 years in the British Merchant Navy) seven years before I was born, and we didn't own a boat. I went from utterly inexperienced boat crew to 33 footer owner between the end of May and the end of August, 1999. I promptly wrecked my Atomic 4 gas inboard engine by forgetting to open the seacock for cooling water, and so had to replace the engine. That involved a rebuild. A busted waterlift muffler convinced me I had a cracked block, so I rebuilt a SECOND Atomic 4 and put it in, as well as replacing the entire fuel and exhaust systems. While a rebuild shop handled the actual crankset replacement, I did most of the reassemblies, and had some help getting the second engine back in. I did all the fuel, exhaust, seacocks, batteries, electrical panel, instruments and plumbing stuff myself, as well as extensive glasswork (retabbing, core replacement, chip and crack repair), the installation of custom-cut backing plates, portlight replacement, and the usual sail and rigging work.






I can't fix instruments, so they've been sent out for repair (they are vintage Electromarine analog instruments, and I like them). This spring, I'll be grinding and filling a crack in the hull-keel join on my old f/g boat: I've never done this job, but I've done enough glass work to feel confident that I can do it.


All this would've been easier had I ever taken shop class or owned a motor more complex than a moped or a chainsaw, but theatre class was where the girls were, and at 14 that seemed a better idea. I have found that going from essentially total ignorance to semi-competent in my 40s, while hard at times, has been rewarding, and that going to a more complex diesel-powered motor sailer hasn't been quite the overwhelming challenge I had thought.



I have also discovered that other people have had the same nemeses as myself in the areas of exhaust venting, cooling and drinking water, and some electrical issues. I have also been surprised to find myself giving semi-valuable advice, because after a number of costly or embarrassing errors, you either improve or take up lawn bowling. I am sure from direct observation that my awareness of my own deficits in not having a long sailing history have made me more safety conscious on the water, and I believe I am more strict about the various rules and good habits that a lot of the "veterans" of my acquaintance. Having a young boy aboard also helps to keep habits like "PFD on deck" going, as well.

The next step that will more or less complete my maintenance ambitions is to learn basic (stick) welding to do minor repairs, and to formalize my diesel and electrical maintenance skills via courses, and to learn to dive, as I think a diving certificate and a willingness to get dirty cleaning hulls and unfouling props would not only help me keep our boat clean and functional, but might be a way to make some money for the older or less-capable cruisers who might be great cruisers, but lack the equipment or the strength to clean hulls while in anchorages.

A codicil to this paean to self-reliance is knowing what jobs to avoid, or which jobs one should parcel out to service people or installers because it would be easy to screw up. The welding together of my solar panel arch and bimini, for instance, or the welding of my new battery compartment frames, or the welding of my thrust bearing, or the construction of my new HDPE water tanks, I will leave to others. I will also have the hull blasted down to bare metal and professionally recoated with zinc, then a barrier coat, then an industrial marine paint, plus a hard tropical anti-foul. I can do those things, and do them on my Lake Ontario boat (where it doesn't matter much), but for offshore, I want the best possible job, and I can't do the best possible job...nor do I particularly want to learn. But I will spec out my preferred products, and obviously, with a steel boat, I am quite familiar with scraping, chipping, priming and topcoating little areas of concern.



It's been an interesting ten years. Certainly, it occured to me last winter as I was servicing the circulating pump on my home's hot water radiatior system furnace that it was pulling apart a series of Oberdorfer, Sherwood and Flojet pumps and various head plumbing pieces that gave me the confidence to do a job I would've paid someone else to do when we bought the house in 1998.

So the painful part of learning previously non-existent skills has been positive, and I still possess an even number of fingers, even if I now sport some minor scarring. We get to sail.

Wood I? Yes, Probably

Something different this time.

I stumbled upon this via an innocent search for a "dutch door companionway" in Google. I was trying to explain to a guy online why I thought washboards weren't the way forward for us on the ocean.


I hit this:


https://www.yachtworld.com/core/listing/boatFullDetails.jsp?boat_id=1983580&checked_boats=1983580&ybw=&units=Feet¤cy=USD&access=Public&listing_id=74772&url=


It's like my boat as a double-ender in wood crossed with a ketch. It's freaking gorgeous and suspiciously cheap. There must be a fatal flaw (like sailing like a drunken pig?), because it looks like a museum piece, not a 14 year old ketch.

I like it very much. So must the owner or the broker, who have provided 97 photos in the ad. I hope she finds a good berth and a fine skipper.

Don't get me wrong. We love our steel cutter, and I love seeing other people owning wood boats (and never sailing them because the varnish is never dry enough), but there's room enough in my heart to appreciate a beautiful work of craft and art, and that's a lovely vessel.

The future of sailing is staying tied to the dock

A wise fellow on a very good sailing forum I frequent mused upon the future of recreational sailing thusly "And so as I thought about this discussion, and the state of the world economy, I began to wonder if sailing is doomed to continue to decline as living standard expectations add so much to the cost of a boat that it prices more and more of the population out of the marketplace? Or will the next generation of young family sailors be willing to keep it simple, and take advantage of technology improvements that allows better boats than we ever had 50-60 years ago to be produced at comparatively affordable prices?"

I think perhaps not.

The context of the question was a gathering in which various production boat designers were floating the idea of a Folkboat for the 21 century. The Folkboat, for the unfamiliar, was a small (25 foot), Swedish boat of World War II vintage motivated by the same ethos that built the Volkswagen in Germany: make it cheap enough and simple enough...but fun enough and safe enough...to get people into sailing. While they are still being built today in wood and plastic (there's a nice one across from me at my club, in fact), they are pretty Spartan, two-bunk affairs that have all the amenities of a 1950s assault on Everest, which is to say a bucket for sanitation and a gimballed butane burner for stew.

So if you built a smallish, simple boat today that incorporated modern rigging and hull forms, sailed fast but was conservative in terms of seakindliness and could take heavy weather...a sort of Super Shark...would people line up for it if it cost fifty grand?

Probably not. People love their gear, and you can't fit the means to create gear's electricity needs on a sub-30 footer easily. You also can't fit an inboard engine so well, and an outboard in a well is going to seem somehow declasse to the prospective boat buyer, who will want to turn a key and start moving.

Cynical sounding? Consider camping. Camping used to mean hauling about 30 pounds of gear low on your back and hiking 20-30 miles out from the nearest road using a compass, woodcraft and a canvas pup tent. You would cut the poles at the site.

Now it involves putting up a "dining tent" next to an SUV and trying to get the Honda genset far enough away not to hear it while it powers your Koolatron and the kids' videogames or DVD player.

Back with sailing, I believe that the desire to replicate shore life aboard a production cruiser, with the emphasis on electrical appliances and conveniences, has to do with the increasingly meagre skill set of the modern urban dweller. It's not a matter of being unable to splice, hand and helm...a lot of people today break into hives going beyond cell phone range.

I took OUT a lot of the aged plumbing on Valiente, my '73 boat, because a barbeque with a 1 lb gas bottle on the rail and a campstove in the cockpit trumped a funky alcohol stove in the galley...and weighed less. The head works, but you wash your hands in a sink filled from a bucket, and you drink from a container or a square bag. Big deal. We daysail that boat, and if we cruise, we can pull in to a dock anytime I think I've got too much money on my person.

I'm keeping it simple on Alchemy, our bigger, newer boat as well. We'll have refrigeration, but just about everything else save a couple of big bilge pumps will be muscle-driven, including a big backup bilge pump. We'll have LED lighting, RADAR and pretty sophisticated chartplotting and systems monitoring, but also oil lamps for drying out the boat and (as we know from sailing in Toronto) taking the chill out of the air. Also, the systems being monitored will be deliberately simple and will rely more on math and "dipstick backup" than sassy glowing displays. Again, not so much a Luddite impulse as the certain knowledge that stuff breaks at sea, and the less time I have to spend scraping and soldering when I have a manual or common-sense option, the happier I will be. I will inevitably be doing this stuff anyway, but I don't need the helm to look like the deck of a spaceship in order to know we are sailing.

I think my attitude stems from this belief: The key to replicating one's shore life aboard is to live a simple life on land. Then the transition to "the cruising lifestyle" isn't as jarring, and the opportunity to learn other skills (I'm still a crappy splicer, but they stay put!) is enhanced. In our urban house, we just don't own a lot of appliances, A/C, "entertainment centres", and so on. Part of that is because I don't choose to spend money on annoying, poorly made crap, but the other part is that we had better be a bookish, handy and skilled family at sea, because "movie night" aboard is going to be a treat, not a nightly occurrence. So I spend time checking out the latest digital radars and manual coffee grinders from Lehman's (http://www.lehmans.com/), the place the Amish get their kitchen gadgets and a wide range of stuff that doesn't need batteries.

I don't see a lot of people willing to disconnect from their gadget-crammed modern life (which I can understand has its attractions) to reconnect with something like the sound of a five-degrees heeled boat in 11 knots of wind chuckling its way through the water. A lot of young people today are confused and bored by the natural world, having never grown to appreciate it.

Go to Niagara Falls, or the Grand Canyon, or some other "beauty spot". What do you see? Hordes of people staring at the "attraction" through the two-inch viewscreen of a digital camera or a camphone.

People want mediated experience. Sailing is very direct. Once underway, you can't easily switch it off and go play with your XBox. I am not sure today's youth has the attention span for it....

...which is precisely why I am taking my son to sea for five years. Come hell or high water, after standing a few hundred watches, he'll have the concentration of a Zen monk, which should stand him in good stead as he comes to manhood in a world full of scatterbrained stimulus junkies. I don't think that a Luddite impulse so much as a critical assessment that certain trends in our society are not entirely positive, and that an alternative upbringing, one which exposes a child to different, more self-reliant ways of living have merit and are worth the work my wife and I are making.

I nearly wrote "worth the sacrifice", but who am I kidding? What will we miss? The opportunity not to get raises for the next 10 years?

Cutting-edge sailing

The traditional "sheepsfoot" fixed blade

These are frequently on sale and make nice sailorly stocking stuffers

Proper rigger's knife with small marlinspike (or "marlinespike").

Some people wear a belt while sailing not primarily to hold up their pants but as a place to support the various gear sailors favour, such as a flashlight in a cloth holster, maybe a submersible VHF, or frequently a cellphone or CrackBerry-style device (for those skippers who have to give the impression they are at the office). The most common accessory for the wind-pushed crowd is a knife of some sort.

The risible thought is that we sailors are all so hopped up on grog and old hemp cables that we are prone to gang-style shiv fights, but the type of knives usually carried by sailors on deck aren't even pointed (look up "sheepsfoot", a Scrabble-winning word, as are most nautical terms). They are usually sharp enough to rapidly part a tensioned line, however, and the best are either straight or are folders able to be deployed one-handed. This is important in the context of, for instance, freeing oneself from a line that is dragging one underwater...you might need the other hand to attract attention or to maintain some kind of proximity to the surface. Sailors' knives will often feature a regular ground edge and a serrated edge for a rapid sawing movement; some full-blown "riggers' knives" have marlinspikes for splicing and little tools for dealing with turnbuckles, split rings or pins and other fiddly objects aboard.

I didn't always carry a knife while sailing, but now I always do. I carry cheap knives because I lose them, but I keep them fully sharp and completely functional while they are in my customarily brief care. I will probably buy one of those fabulous, hundred-dollar riggers' knives before we leave, but I'll want a Dyneema lanyard to keep it attached to me.

As to why I now always have a knife: About the second year I had my first boat, I was single-handing in fairly brisk wind off the land, so there was only "nervous" seas, but plenty of air. The boat was sailing nicely and I had the tiller pilot on.

I stupidly (the adverb that precedes "experiencedly") went down on the lee side to retrieve dunked fenders as the boat started to cross an open estuary, and the wind was funnelled there to much higher speeds (I suspect 40 knots as it was already 25-28 knots). I had on neither tether nor PFD nor handheld radio, and we were welll knocked down, with the cold October water of Lake Ontario up to my hips. By arm strength alone, I crawled up to the coach house traveller and managed to release the mainsheet, which flew out with such speed that it took part of the flesh on my fingers with it (Yes, now I wear gloves, as well!). The boom went out and the boat found her feet, and I spilled air until I could tie up my hand and continue. The autopilot had simply been overwhelmed at that point.

Had I a knife on me , I might have had the option of cutting the mainsheet instead of releasing it from an awkward "too close for comfort" position. I had plenty of line on board to rereeve the blocks and to get back to sailing.

A couple of seasons later, after I started to carry a knife, we rounded a sheltered point with an old No.1 genoa up and again, the wind went from 8 knots to 22 knots very quickly. The leech line of this sail hooked on a spreader end, making it difficult if not impossible to douse (hank-on sail with no downhaul). Going off the wind didn't help...the leech line was somehow hooked deeply into the spreader end (yes, I now tape off the spreader ends.)

Once the sail began to rip, I got out the knife, told my seven-months-pregnant wife to "feather the main close to head to wind" and stood on my toes to cut the leech line. I was then able to drag the mess down and we sailed into our basin under main only.

I have also cut off a piece of trailing line that threatened to foul a moving prop, but that was on another boat.

As can be seen, inexperience or lack of anticipation led in part to bad situations, but there's a place for a small, sharp knife on board any boat, I think, and now it's habit for me to carry an inexpensive sailor's knife (serrated edge) on my belt, plus an inexpensive multi-tool. I use the multi-tool far more often as I am forever tightening bolts or screws or other fasteners both above and below deck. I go "inexpensive" because it's not tragic if a ten-dollar knife or multi-tool is sacrificed to Neptune.

I am aware that slicing a loaded line brings its own issues, but I still believe that lines are cheaper than limbs, and sometimes you have a need to cut away a line to save limbs, life or more important parts of the boat. The idea of disposable "lashings", small stuff you can slash with impunity to free it from a secure state, depends on having a very sharp knife and being able to deploy in in a dynamic environment without hurting yourself.

I find the cheaper sort of divers' knife can be mounted on nav station or companionway frame for retrieval in passing, should you have no pants on. Seriously.

If you have a steel boat, it's easy to have them magnetically stuck to things a sufficient distance from the compasses. I have one by the companionway and even a hand axe under a locker lid. I also carry pretty beefy chain cutters in case I have to neuter a whale.

A friend who dives and also owns a steel boat has a pretty serious dive knife mounted next to his companionway steps so that he can grab it and unsheath it with his trailing hand as he hauls himself into the cockpit, so it's not so uncommon a practice.

The inherited knife is very much like this.

My favourite knife is a pretty utilitarian Solingen blade with a leather grip. There is nothing at all remarkable about it except that it belonged to my late father who wore it as a merchant seaman for a number of years in the 1940s and 1950s. This knife was used to cut out a tooth from a sperm whale (yes, they were different times...), which I also have, along with an excellent example of Carl Zeiss 7 x 50 binoculars my dad picked up in post-war Hamburg for a pittance, apparently advertised as "U-Boot Kapitan Glasses". And thus concludes today's pointed remarks.

Is your cruising kitty stuck in a tree?

There is a lot of chatter of late in that small portion of the "online cruising community" to which I am exposed. Unsurprisingly, it's all about the world economic D-word and how it is affecting upcoming cruising plans. For those who were counting on steadily accumulating retirement plans and stock portfolios to finance an endless summer bobbing about in the Caribbean, things must be looking squally indeed.

For myself, our retirement fund is entirely separate from the calculations we've made in order to test the feasibility of five to six years of world cruising. Our decision currently is to defray paying down the mortgage of the house we intend to rent out while gone (thus reducing the cruising kitty), primarily because our variable rate has dropped to under 2%. Let the tenants pay it, is the current thinking.

We want only for the house to pay for itself in rent, and to cover the property taxes, the insurance and the utilities. We don't require "a skim" for cruising, although such a cushion would be of course welcome, particularly if it covered expensive recurring items like medical coverage or a major failure like "replace motor".

I'm Canadian and I seriously expect our dollar to leap about 40 cents U.S. in value when the world realizes the U.S. is printing its way to "recovery", which I interpret as "10 years of stagflation until all the crap debts are dealt with". I have a nearly 30 year record of self-directed investing (I started with a "stock club" in high school) and have a reasonable confidence in keeping our finances in order in the coming years.

Having said that, we have two adults and one child proposing a five-year circ on a paid-for boat with about $20,000 in further services I can't do, or can't do well enough for the open ocean (like welding) and in gear (like RADAR, solar panels and batteries) to install or to retrofit before we go in 2011. In other words, I am committed to a fairly high "pre-spend" in order to just get off the dock.

I expect that we will spend approximately $25K/year (assume Canadian/American money at par here), of which $6,000-$8,000 will be fuel and maintenance. This may seem low, but such rather simple expedients of anchoring out consistently, the fact that a great deal of the boat's systems will be new (sea-tested, for we plan a trial trip to the Maritimes) or personally refurbished and simplified. Add to that a willingness to use the sails as much as possible (and carrying the means to repair and extend them) can save a great deal of money from the more typical cruiser budget.

I advocate reading "The Voyager's Handbook" by Beth Leonard here, because a number of spending scenarios in this book convinced me I wasn't radically off in my thinking.

We may return only once in five years back to Canada. Not flying back and not having the cost of decommissioning and storing the boat on land is a great saving. We do anticipate one "prime and paint" haulout, likely in New Zealand, that might take a season in a yard.

As noted above, we will be renting out the house (two two-storey "flats", maybe $2,500 in and $500-$650 out in insurance, utilities, land taxes and "other" monthly) and we will be paying either my sister or one of my wife's brothers (he's a superintendent) to be "the face in the place" in order to collect rent, to do light maintenance and to handle the bills.

Again, unlike some, we aren't relying on tenants for the cruising kitty. We are wanting them to cover the mortgage ($1,200/month). I will likely work while we are gone (I'm a writer and graphic designer) and expect to make maybe 18 months of the 5 x $25K worth of expediture while in transit. I'm setting that aspect of things up now.

I also expect to lower costs by doing some fabrication and fixing for other cruisers, as I will have a small workshop aboard that will carry the sort of tools I need for a steel boat (plus the means to power them), but aren't always practical to carry on a Beneteau, for instance. I suspect many of these sort of transactions will be "in kind", but that's fine: If I'm handed a case of 24 cans of top-end stew and a bottle of rum for two hours of putting in custom-cut backing plates or for beefing up an anchor roller or for stitching together a mainsail split, that's a good cruising day for me and for my crew.

I look long and hard at various cruising narratives and blogs, and even if I assume 25% of the stories told are either lies or prettied up beyond recognition, I don't think my numbers nor my game plan are particularly unrealistic. The fact is that a lot of people go cruising who are perhaps too old for it, too unskilled/self-reliant for it, too reliant on technological aspects of it, and who have a great fondness for "amenities". I don't think this is a harsh assessment, just one that acknowledges how pervasive "condo thinking" is among those who would sail the seven seas, and end up motoring between Caribbean marinas with the Jimmy Buffett and the air conditioning at full blast.

Us, not so much. With me at 50 in 2011, and with a 37 year old wife and a 10 year old kid, we'll be relatively youthful in the cruising community, yet not suspiciously so! I expect opportunities to cut costs via small jobs will be available, and as I come from a marketing background, I know how to ask.

While we plan on working very much on an ad-hoc basis, the element of barter would tend to keep things friendly. We are also willing to trade skills, like "we'll scrape the crap off your hull if you repair our head" (some people would consider this a good trade!). An approach we've considered is announcing on cruiser nets that we are available for "consultation" before we arrive, but this obviously skirts the prohibition on commercial activities. Another tack is to list skills on boat cards...along with issuing really nice boat cards. Word will likely get out.

If it doesn't, it's not critical. As I said, ad hoc. One idea I had was anchor recycling: In some popular anchorages, it is likely that there are unbuoyed, snagged or otherwise abandoned anchors on the seabed that might be retrievable by diving on them. Get the kid to chip off the barnacles, replace a couple of clevis or cotter pins, and sell 'em to other cruisers at cut-rate. Or trade them for diesel, or crates of beer.

You see where this thinking leads: one key to cruising economically is to extract oneself from the money economy in the first place. This can mean getting creative with stores, buying supplies when and where you find them cheaply, and getting used to trading with the locals.

It also helps to like fish. A lot. I do.

The bartering with other cruisers is one thing, but I expect to be bartering with the "natives" as we plan to go a little off the beaten track in the Pacific and Indian Oceans. One of the reasons to carry a Honda genset is that I can drill holes all day in concrete or wood with my 1/2" chuck Makita because I've brought my own power....power being the missing or highly restricted element in some distant anchorages. I figure that's good for a couple of pig roasts and a guided tour to the weird limestone caves if I throw in a box of pencils and a few novelty T-shirts.

That may sound condescending; it's not meant to be. I am citing it as an example of cheap and common items I can carry in bulk that may translate to trade goods in certain places. A waiter at my boat club came to Canada from Cuba 3 1/2 years ago and said just last week that the plan I got from a now-dead cruiser (Diane Stuemer of Northern Magic fame) to bring lots of kids' T-shirts to Cuba was still a great way to make friends and meet people...because Cubans have difficulty getting T-shirts. Who wouldn't want to help out with that?

My point is that simple trade activity can supply simple items that are not necessarily in ready supply in all places without seeming to be either exploitive, akin to a bribe, or an "in your face, Third World!" move, none of which are liable to make for a happy anchorage. Obviously, I can pay for stuff on passage, but if the point is to see the people of other countries, and not just while they are working for peanuts in Western-style marinas, then I think some effort should be made to engage them in a way that offers them some incentive to treat you more as a human being and not as a transient profit centre.

I think the money economy of the West is largely a mistake in places where people basically work at subsistence levels of growing crops in plots and fishing the sea....and where there are few shops and maybe a ship once every three months. So I would much prefer to barter service for local goods, or for local service. This way, I avoid the money element as much as possible, and yet arguably do something of value that is valuable immediately and in context. If I have the only circular saw or bending jig or spare tarp grommets within 100 NM, I can do more good than slipping the village headman an American 20 dollar bill so I can drink kava with the boys.

My wife's a biologist with some medical training. That should translate well, too. While she's not a doctor, she can set bones and stitch and do a fair number of medical duties...including recognizing when the pros need to be summoned. That's probably welcome in many places.

Obameter: Because Weather, Believe Me, Changes.

By most maritime law, you are required to have some sort of VHF radio if your vessel is over a certain length.

Of course you do. Only prudent, really.

But as I am of a more independent cast of mind, and because the range of VHF radios is pretty short, I like to avoid trouble in the first place. A big part of that at sea is knowing the weather. A large part of knowing the weather is knowing what the barometer says and what it means.

If you sail coastal waters or just daysail, you don't necessarily need more than a cheap barometer that can be calibrated to a known source, like a nearby weather station or airport. By "cheap", I mean those frequently expensive aneroid barometers in brass and glass that go with the anchor-motif throw cushions and the drunken skipper corkscrew. Yes, I'm as guilty as anyone, really.


Keep in mind, however, that any barometer that is working (if not super-accurate) requires calibration, and that if you are inland or Great Lakes sailing, you have to calibrate your barometer to the local altitude. Some sources report "sea level pressure", which is not the pressure on the Great Lakes, nor is it up the side of a hill somewhere. Sailors in Alberta lakes could be any number of feet above sea level, rendering an airport's broadcast "sea level" readings opaque to say the least.

For those who for reasons of personal interest, expanding their seamanship, or because they are going to be sailing long passages without being able to receive info from weather buoys or synoptic charts, a recording barometer becomes very helpful. This can be analog or electric, paper roller (old style and blindingly expensive, but gives you a graph more or less continuously over a week's time, usually), or digital display.

I have aboard a now-discounted Speedtech barometer: http://www.landfallnavigation.com/-neb01.html

It gives me 24 hours of readings, which is enough to track weather at a distance as well as weather that's bearing down. Basically, sharp drops or sharp rises portend wind (not always true, but frequently the case); high pressure means light winds, fair weather, and low pressure can mean dirty weather or just rain. Knowing the speed at which the pressure is changing can, with experience, tell you how near or far a storm is, how fast it is likely moving, and whether it will push the boat nicely, or is a reason to batten down.

I also have a Suunto sports watch that has a recording barometer display with a three-hour trend interval, although I can manually record readings at any point. I use this frequently during periods of changeable weather to determine if it is likely to rain by a certain point in the near future. Practise and you can get better than the weather people, but only in a local sense.

Combine these instruments with looking at clouds, currents, sea state and so on, and you are essentially a one-person weather station with maybe a 50 square mile "forecast area". This is not always necessary if you can receive local or "custom" forecasting...but forecasting is an educated guess, and you are the one actually in the weather.

I recommend any sailor, even the lunch-hook crowd, to take a weather course or two to understand and in even a small way to predict your sailing weather. That big black cloud could be a great sailing opportunity or a run on your candied ginger supplies, but isn't it better to know?

Recommended reading for Canadians: http://www.starpath.com/catalog/books/1829.htm



It's a short, heavily graphic, wire-bound booklet focusing on Great Lakes-typical weather, but which has very solid advice for all sailors. It's possibly the best government-written publication I've ever seen that wasn't just a list of buoy types!

How do you spell "y'arrrrrr"?

Should we leave as planned in two years for a projected five-year circ with a kid who will be coming up on 10, the question of education is bound to arise. Our current thinking is that we will work with his school and our provincial educational system to educate him more or less in the curriculum as it stands, with "enrichment" courtesy of our travels.

Needless to say, we are from a large city and are Canadian. Home schooling on a moving boat may not be possible where some live, although many cruisers with kids from the States at least seem to use the Calvert School curriculum (http://www.calvertschool.org/home-school/). I suppose one advantage of it is that you are supposed to receive everything, down to the pencils and crayons, in a big box. This has its appeal, but so does an honest attempt to keep our kid's education nominally Canadian.

Home schooling, or rather boat schooling, is not by its very nature as time-consuming as regular school. From all reports, this means our son will do about 120-130 minutes of fairly intensive schoolwork per day (as it will be "one on one"), which would be the case of a house-bound kid who couldn't physically get to school.

He will submit his work electronically, probably once a week, and will "appear" in class to present topic-specific reports. As my wife is a biologist and I come from a writing and media background, I expect the presentations will be acceptable.

I agree that structure is important, although a gale on passage might count as a "snow day"...or an opportunity for a project on bad weather!

We are already working on him at age seven to develop independent study habits...he's reading a hell of a lot, so that's a start.

This is our current thinking: Keep him "in school" via distance education, but incorporate some flexibility in his daily life.

He has a lot of friends and it would be nice if he could keep them as "pen pals with visuals" and it's an irony of the 21st century that social networking, satphones and easy access to self-made video production has to a great degree normalized "distance friendship" between kids.

Navigating the 2009 Toronto Boat Show

Don't know if I've mentioned this, but I edit my yacht club's newsletter and contribute when I can. I usually go to the Toronto International Boat Show with the idea of getting a story out of it, and figured I might as well edit out the stuff of interest (and perhaps limited interest, at that) to my club newsletter readership and package my impressions as a "feature". The fact is, I'm working on a big project, the weather is terrible and about the biggest accomplishment I've had since the last post is lashing down a new tarp over the pilothouse that is keeping most of the snow out.

I am also arranging to stay out of the water this year for all the big jobs I have to do (see below). The most positive thing about this is that the looming recession might free up welders and likely will lower the price of things like heavy-gauge tinned conductors, i.e. boat and battery wire. Anyway, here's my take on Canada's biggest boat show:

There were a few things a little different this year about the Toronto International Boat Show. For one thing, the absence of Derek Hatfield (http://www.spiritofcanada.net/) from his customary post soliciting support for his Spirit of Canada Open 60 bid was noted, and even though this massive effort of fundraising and boat building ended off Tasmania with Derek and his vessel damaged, but unbowed, rumour has we haven’t seen the last of Spirit of Canada…so please consider helping Derek and his team get the boat back to Nova Scotia to keep that dream alive.

While I noticed that crowds seemed a little thinner the two days I visited, this was not the case at the big power cruisers. Recession? $1.50/litre fuel? Not for these folk, for whom a 10-minute line-up to go see a bathtub on a boat was all part of the dream. That and a few SOLD signs on some truly vast vessels made me wonder if the new 45 foot docks my club voted to install this year will suffice.

The sailboat section appeared smaller than usual to my eyes, and as I stepped aboard a couple of examples of the production boat builders' art with friend and fellow steel yacht owner Cap'n Matt Phillips, we concurred that we weren't the marketing department's target, and that these boats (I liked the Hanse the best of an uninspiring, under-built lot) were geared for coastal stuff and might be a handful in a real blow.

A lot of these boats have a combination of clever or overdue ideas (like great access to the engines, clever electronics and good stowage) with things like few handholds, iffy lifelines and missing positive locks on floorboards and some cabinetry. The front-loading fridge on a port galley was about it for me. The Fruitopia would hit the fan on a 20 degree heel, I suppose. It would also hit the starboard settee. On the upside, we did see a smaller Island Packet that looked more rugged, but the line-up was long and I didn't see the inside. We also saw a lot of clever dinghies and smaller jump in and go boats.

On a personal note, I was happy to see a few new names at this year’s show, particularly New Found Metals, makers of reasonably priced and beefy portlights, and several more “industrial marine” firms that featured the kind of gear I fancy or who aren’t the kind of trades people who can’t work a day timer. Again, the unadorned Garhauer display featured idle eyes widening in shock as they read prices that appeared to be misprints, and again, I found something in a size 13 at the Sperry place and a ten-dollar future painting hat that, if you squint, looks like a Tilley. And some readers will recall the name of Robert Hess, Atomic 4 guru out of Vancouver. Well, he’s in Toronto now, and works for Eastern Marine and is a very helpful fellow who may know even more about diesels. Consider this a plug.

Lastly, I note that all the advances in recreational marine electronics I keep reading about in Ocean Navigator magazine and on www.panbo.com are producing even more market-ready products to turn one’s sailboat into the helm of a space ship. New standards, such as NMEA 2000, are further integrating all manner of devices, from bilge sensors to engine controls to reef-spotting cameras up the mast into centralized displays that give the tech-savvy skipper more information than the average paramedic. One hopes in the future that old Eyeball Mark I will be raised from time to time to confirm the sea state or the presence of a jetskier on the bowsprit.

For myself, I will be hard pressed to raise my eyes from the multi-kilo load of catalogues, data sheets and brochures I hauled away from the show. I find one of the harder challenges of preparing for ocean voyaging is not only to avoid buying necessary technology, but to not buy too much of it, and to balance off utility with energy draw, the space it will occupy, and the ease with which it can be operated by clever by crew with varying levels of technical aptitude.

End of the year thoughts and decisions going forward

After a long gap in the late fall filled with seemingly endless paying work (as opposed to boat work), holidays, birthdays, familial stuff, and extremely prejudicial weather from a boat-fixing point of view, I am back with some final thoughts of 2008. Yesterday I was down on the boat in blowing wind retarping the pilothouse. Much on my mind (besides hanging on for dear life as my fingers gradually froze) was the likelihood that the best thing I could do for our plans would be to keep the boat on the hard this summer instead of launching. When I suggested that the need to weld, to paint, to replace tanks, to sound proof, to replace plumbing, exhaust and part of the electrical system, to pull the rudder and shaft, and to redesign and rebuild the aft cabin might be better accomplished ashore in 2009, my wife's face fell. On some level, she understands that having the boat in a parking lot instead of a dock will make many tasks easier (not even taking into account the proximity to the club's well-equipped workshop), but the prospect of a second summer without using The Main Ship is disappointing to her, as it is to me. The presence of a functioning dinghy on board, plus access to the old boat at a nearby club, should help make the prospect of labouring in a gravel parking lot while obtaining sculpted calves via ladder climbing more palatable. So to any readers of this space (are there any readers?), the possibility of fewer sailing shots and more grainy pictures of various marine nooks and yes, even crannies grows stronger in '09. As may be slightly apparent from the rather sad picture above, we got a bit of rust busting, MetalPrepping and two-part epoxy painting done in the very few non-cold, non-raining, non-blowing or -snowing days we had this fall. The silver streak below the waterline is anti-rusting undercoat put on in a hurry after we noticed after we had done the major touch-up work. It seems that someone dinged our boat, likely with a crane spreader, when retrieving a boat to go on a trailer. The lists of "suspects" is short, and I am confident that this was simply an unnoticed scrap by a club member and that I'll get some free barrier coat out of it at some point.

Recently, I read an account of a big yacht delivery (see http://cruising.sailboatowners.com/forums/CSBB/index.cgi?read=138777 ) in which the jocular crew recounted all the various "conveniences" that had gone horribly wrong on an ostensibly new, and by any measure, high-end boat. One comment, which seems to typify for me the state of modern cruising, went as follows: "About 200 miles off Hatteras, the feed pump to the Spectra watermaker died… It had worked fine until that point, but we were now suddenly quite low on water a LONG way from our destination, thanks to the fact that the electric toilets on this globe-girdling BOTY require fresh water to flush… Classic example of where modern kroozing has brought us, one has to run a generator to run a watermaker to run the toilets… LOL!"

It's not the freshwater head I object to, it's the need to make freshwater for the head. I am quite comfortable with the notion of using surplus freshwater to flush heads from a raincatcher or a watermaker or if you've got the complimentary tap at the Port Captain's personal dock. That's great and a rapid application of even an occasional fresh water flush (or a vinegar flush or some other kind of "treatment") is going to do any shipboard plumbing a world of good by killing critters in the works. But the thread of utility and systems simplicity grows thin indeed in my view, particularly if you have the usual flat-bottomed hull of modern "performance cruisers" and maybe 50 gallons of water tankage to play with, and if you have to have a series of electrical pumps to make it all work just like in your shoreside condo.Now, I have 200 gallons of water tankage, and if I throw a small watermaker in there, I might be one of "those guys" who can use a diverter valve to have a freshwater head, if only to cycle through "older" water in designated tanks. More likely, I would keep 50 gallons as "semi-potable rain water" for washing up, showers and yes, even luxury flushing.

Everything on our boat, with the exception of certain navigational and communications gear, is moving in the opposite direction of this particular example of modern comfortable cruising. I have pressure water, but I am going to a second set of taps for foot-pump water. I have a wired hot water heater, but I am plumbing it into the heat exchanger so that we will have "bath day" on "motoring day". I have A/C, but because the amperage to start it exceeds what I can make with inverter and Honda 2000 (well, it might kick, but that remains to be seen), I will generally not use it. The windlass is manual first, with electric backup, and so on. A huge Patay manual bilge pump has its screened pickup lower than the electrical Rule bilge pump, and so on. Keeps the crew fit, I say.

All this isn't a Luddite impulse, but an attempt to have more than one way to accomplish onboard tasks, particularly ones that involve electricity. The reason for this is that without exception in my experience, cruising narratives and boat delivery stories tell of the gadgets that didn't work due to lack of robustness in design, the harshness of the saltwater environment, or because the wiring was just too damn complex to service properly in a pitching boat.

If it is a matter of throwing a few switches and turning a few valves to turn our passagemaker from a muscle-operated workshop to a gently humming den when the appropriate power and water manifest at a dock, why wouldn't we build these options in? It seems quite apparent to me that I can avoid a world of maintenance hurt thereby at very little "inconvenience".

Also recently (what is it about spending the winter on the hard that gets the mind thinking so much about sailing?), I replied to a question asking whether it was possible to be both a cruiser and a racer, as the questioner's experience had led her to believe them to be two separate and borderline hostile tribes.

Now, I have raced, and hope to race again, on other people's boats, as has my wife, but on our old boat (a classic '70s racer-cruiser), and my new boat (a bulbous full-keeler of less-sprightly response), I cruise as if I am racing. In other words, I don't see any dichotomy between racing and cruising, but do see a difference between sailing effectively to the limits of the given design and sailing less than effectively. A lot of cruisers, to put it kindly, don't seem to fully know how to sail, or, if I am to be generous, may know very well but in fact choose to sail in a manner that gives the impression of partial knowledge of the skills to sail well.

I have tacked more rapidly in my full keeler than have sleek fin-keelers nearby, much to the horror of sporty racing types, because I know how to run my boat and because I have a great big rudder and oodles of foresail to use to bring her head around effectively, unless it's dreadfully light air. Will I win races? Hardly. Will I get the most out of the boat and belay the impression that she's just a fat barge loose in stays? I certainly hope so. Any time I hear the crew on an obvious cruiser shout "Ready about?", I know I am in familiar company.

Nonsuch 30s, 33s and 36s (heavily built cat-rigged cruisers, for those unfamiliar with them) are regularly raced around here and frequently win or otherwise rank highly after the PHRF ratings are applied. Go below, and they look like nautically themed rec rooms, however. But their owners know how to squeeze potential into kinetic in their boats, and thus win races. Racing exemplifies sailing at its highest pitch of skill. We can't all possess those skills, nor would we in many cases want to. It seems to me, however, that learning to sail better means the motor stays off that much longer, and to me, if you don't want to use the sails, why did you get a sailboat?

Happy New Year, ye salty dogs.

Engineered: A Fuel's Paradise

Responding to a post on a sailing forum recently, I had a chance to sum up my thoughts, such as they are, on the question of what spares, tools and strategies to bring on passage, by which I mean oceanic sailing beyond easy or timely reach of mechanics, service depots, parts vendors or English-speakers.

What to bring to keep the diesel engine in good order? I would encourage the following ideas: Six months before you go on passage install a new starter and a new alternator. Seal the old, working ones in bags with dessicant and store in a dry place. Six months with a new alt and starter should reveal any issues, like whether you need to upgrade your belt to something of better quality or heftier construction. As for the old, if working, bits, I am a big fan of the "drop in/bolt on" solution: Even in my Lake Ontario Viking 33, I preferred to swap out the water pump entirely than to try to remove an impeller with the aid of dental mirrors and contortion. It is far simpler to carry an entire spare and gasket, ready to go , than to try to do some jobs at sea. This is just my opinion and rule of thumb, however; were I a diesel mechanic, I might have a different viewpoint.

If your diesel is old and has been run seldom, consider a "prophylactic overhaul" whereby the cranks, rods and journals are inspected, the bores observed for scoring, and so on. Boat diesels can and do die from underuse, not overuse, usually...something common on Lake Ontario where the time spent "winterized" greatly exceeds runtimes during the sailing months.

Replace (or have replaced) anything that looks off-spec, and sail away secure knowing that the odds of throwing a rod, etc. are very much lessened. This is also an opportunity to service engine mounts, paint the bilges and to derust and paint the engine a light colour that will show oil leaks.

Impellers can and do fail. Bring several. Consider switching your raw water pump cover to "Speedseal" or something similar that will allow you to avoid bending into a pretzel during a gale. Consider also a high-temperature alarm and a low-oil pressure alarm to warn you if you aren't in the habit of staring at the gauges. I am, and I keep an hourly log of my readings. You might not have an hour, however, if either the cooling or the oil failed.

Bring engine zincs, another "consumable" that can be hard to source.

Bring at least enough hose for a complete replacement, and bring enough hose clamps (aka "jubilee clips") for two complete replacements.

Consider a beefed-up fuel filtering system, as in one with its own pump to pressurize the fuel side without the engine running or one which can polish fuel BEFORE it goes to the daytank.

Invest in a Baja-type filter for your deck fill to get dodgy particulates out before it reaches your tanks.

Consider a daytank, perhaps gravity fed. Rig your fuel and return lines so that the daytank contains x litres of "certified clean" fuel, even if your main tanks are filled with dirty goo.

Consider rerouting the fuel and water vent lines away from the topsides/under the gunnels to higher and drier in the boat. The first three causes of diesel death are water in the fuel, from what I've gleamed. Hence, its primacy over some other concerns, like "bring spare injectors". Sure, bring one, but injectors are not a job I would handle myself...aligning them and calibrating them strikes me as a specialist job.

Consider getting rid of the spring-loaded plunger in the exhaust loop and simply run an open hose high into the cockpit or someplace where the occasional spurt of water will PROVE the pump is working and which cannot fail, sucking water back into the manifold.

Bring spare gaskets, gasket goo and gasket paper of different thicknesses. Frequently, a gasket will fail slowly, leading to a weeping pump and partial loss of pressure. To you, it looks like your diesel's running 10 degrees hotter. Look in your bilge and/or keep oil pads beneath your sump. The location of water or oil will tell you where to look for problems.

Figure if there is any method that will start your diesel with zero battery volts. Practise this method, if applicable, a few times.

Go over the entire engine in situ and figure out how you would remove parts for a regasketing, say, when the engine was cold, hot or when you were in heavy weather. Picture the tools you would need and the steps it would take to do these things. Type up the procedure and put them in laminated pages in your maintenance log. You will find a reason to buy fairly esoteric tools, like right-angle screwdrivers, crow's foot wrenches or socket ends and other single-use, frustration relieving devices.

Start a maintenance log!

Get a single-volume book, like Calder's Mechanical and Electrical, that covers basic to intermediate maintenance of diesels and electrical topics.

Take a basic diesel course. Read and bring this book:

Do all these things, particularly the bits about keeping your fuel free from dirt and water, and you will avoid 90% of the common dead diesel issues. I'm newer to this aspect of cruising than I would prefer to be, but these are my strong impressions having already had to solve a few problems to my satisfaction.

Out and At 'Em

Yesterday was "Haulout 2008", the painful ritual in which one's vessel is hoisted high into the hostile element of air and rudely plonked onto a device with the comforting name of "cradle".

Ours was very nearly the first boat out, being at one corner of the yard, as I had requested proximity to both the crane and the workshop (newly rebuilt and visible in the background of this otherwise grim scene of para-wintery grey.


Oh, how it rained and later, how it rained and blew. Only half the boats got out Saturday, and the crane crews and boat owners stopped hauling Sunday at 11 am when the wind hit 25 knots and stayed there, kicking up three to four foot waves in the channel from which we haul the southernmost two rows of boats (and they tend to be the bigger, heavier, more deluxe models. Tanks like ours are tucked in the back!).


Seen here is the rudder providentially hanging out over the walkway, making it easier to remove it for painting and checking the welding. The other reason to remove the rudder this winter is to pull the prop shaft so that it can be checked for straightness and so that a thrust bearing can be welded for the universal coupling and so the prop can be more easily mounted.

The nuts on the mounts look rough and I might as well have the thing off while I can. I will also debate the merits of plugging the rudder holes: currently, the rudder fills with water that is dramatically shed when the boat is hauled (why is the boat peeing, Daddy?), but it can be left optionally empty or filled with oil. I have heard both things are done, but am unclear as to the reasoning of one method over the other.

During haulout, I got to drive the club's "crash boat", a 20 foot f/g fishing boat with a 90 HP Suzuki on the back. Used normally at race marks or as a base from which to pluck junior sailors out of the drink should a gybe go wrong, at haulout it's used to circle in the Western Gap on the south perimeter of the club, watching out in case people pushing boats away from the unforgiving sea wall (they use long poles with carpet squares) while waiting for the crane slings take a tumble. Yesterday demanded a measure of attention, as the waves were making the boats buck in the slings until they cleared the water, and the crash boat doesn't have any keel to speak of, making the ride rolly indeed.

I've offered to help next Saturday, and so may ride that pony again.

Provisional Thinking, or Your Boat is Ajar

Recently, the question came up on another forum about how to stow food aboard and what food to stow. I have read a great deal on this topic and had many an interesting discussion, many of which centered on "if only we hadn't bought 80 pounds of hamburgers a week before the reefer blew". Anyway, here are some current thought, pun partially intended.

Methods of preservation and stowage vary. Given that provisioning in many places is a bit of a crime of opportunity when it isn't a complete crap shoot (there should be a pictorial dictionary of food in PDF form), you have to be ready to buy not only what you can eat at once, but to preserve what you might fancy more of a month later.

Some favour vacuum sealers, not only for food meant for the fridge or to keep cooked food in suspended animation, but also for spares, gaskets, etc. to keep them free from rust. Others favour "home canning" in Mason jars, with such little tricks as blocks of cheese in olive oil in sealed jars, stowed with plastic dividers in Rubbermaid snap-lid bins. You eat the cheese and then use the cheese-flavoured oil for cooking or salad dressing. Other tricks are using rice grains in spices and salt as a desiccant, and having a 12 VDC cooler for beer/pop/cold water when motoring to save opening the fridge. Not everyone has the space for these Peltier-fan-driven wonders (which frequently heat food if you reverse the plug), but if you use it as a clothes crate when it's not a cooler, you can do the sensible thing and add warm drinks from the stores, sandwiches from the galley and then fill the day's drinks one time from the fridge, and then put other warm drinks in the fridge. The fridge is then shut for eight hours, you motor along for three, maybe, and the cooler is cold for 24 hours and the fridge is only warming the next day's drinks. The cooler can be made more efficient at the cost of space with 1/2" closed cell foam inserts. Four amps out of the alternator isn't going to kill your battery charging regime, and the key to a low draw fridge (beyond insulating the hell out of it) is to have the contents memorized and arranged so that the lid is open for as few seconds as possible.

Regardless, there are a range of snap-lid bins (you can label them with "dry" or erasable marker) that will more or less fit stringers and frames, and if you look for wide and long spaces with only a few inches of height, you'll find plenty of space aboard. Keep a log or diagram of your stores, and try, as always, to keep the heaviest loads near the middle of the boat, and to organize meals ahead of time so that a week's food is in the topmost, accessible bin. The other thing that seems to be important is treats and snacks...if you have an evening ritual of a hot coffee and a bit of chocolate, for instance, get really good examples of both. This makes the occasional "stew three nights running" periods bearable, and takes you well away from the feeling you are on an endless camping trip. Likewise, choose meals that can be prepared in one pot or pressure cooker for those times underway when cooking is problematic and you just want to add hot water to a package of soup. You can even pour boiling water into thermoses if you expect a bad spell.

Not exactly as pictured!

I've purchased a couple of used Forespar Mini-Galley-type gimballed cookers, one of which I expect to use in the galley and the other in the pilothouse, close to the companionway. Hot fluids of a nourishing or reviving nature seem critical to deck watch effectiveness and happiness, and yet there will be times when galley work is difficult or even dangerous. These will provide safe heating at severe heel, and the smell of hot coffee on a dark foggy night in the pilothouse will be welcome indeed.

Unwanted visitors can be a huge hassle, and short of the obvious screens, mosquito coils and netting, there are the little bastards that get a free ride thanks to land-based assumptions inappropriate to tropical shopping.

Cruisers may want to consider the possibility of weevil, bugs or vermin brought aboard and how to a) prevent that and b) fight it if it happens. The biggest offender here is apparently cardboard boxes in the tropics. I have read in several books that cardboard is left on the pier and goods are brought in ziplocs held in string bags as a weevil/roach deterrent. Others also use "Chinese hat" conical line barriers on dock and even mooring lines (rats swim quite well).

Don't rule out canned goods, but be aware that the glue on the labels will both melt and be eaten by bugs. The traditional method is to strip the label, write the contents and date on the lid with marker, and then varnish the can to reduce rust. Such cans will survive even damp bilges undamaged, although really it's the humidity you should worry about and keeping the boat vented.

There's many books on food prep and storage aboard. Most favour the fairly Spartan approach in that the fridge is something you should keep for specialities, as they can and do fail. Better a small fridge/freezer with a high turnover than something that if it goes, rots a few hundred bucks worth of steak.

Wow, I wrote more than I had intended. Apparently, I've been visualizing my own passagemaker as a vast storehouse of calories. I find it interesting that while cruisers seem obsessed with food, most of them are in pretty good shape, perhaps in part to the calories burned keeping current and archived information handy in one's head as you try to stay aware and afloat.

Farewell to Silverheels III

Ken and Lynn and I met in 1999 taking Canadian Power Squadron courses, of all things. Ken had the experience actually sailing, mind you...he owned a 19-foot Sandpiper named Shortwave that he didn't get to sail enough. Long story short, the pair hooked up (after school studies?), changed Shortwave for Silverheels III, a 35 foot Niagara 35 and when Ken retired in April after decades working at Ryerson University fixing audio-visual equipment and assorted electronics, Lynn had little problem "retiring" in her 40s so that they could take their boat south, date of return indefinite.


While not quite "gone" yet, they plan in the next couple of weeks to dismast at Oswego and take the canal system down to New York City and then to go via the ICW south to Florida and the Bahamas. They have worked exceptionally hard and long to make this dream happen and I wish them, my inspirations, fair winds.

Read all about them here: http://www.sailblogs.com/member/silverheelsiii/

Roundabout minus the Red

It will have occurred to anyone with a world map and the meanest intelligence that there are only a few ways in which a sailboat can get around the world and stay in liquid without an ice axe, a parka or a shiny set of deck-mounted missiles. The first two would involve a circumnavigation via Cape Horn, or the Northwest or Northeast Passages, once frozen, now less so, but seas poorly charted and not, as they say, to be trifled with.

Panama, the Cape of Good Hope and the Red Sea are pretty well the remaining choices. The Red Sea has in the last few years been subject to increasingly vicious piratical activity, emanating from either Yemen or Somalia, or some days both.

Transiting this area is dangerous: Yachts travel in convoy and keep the Western navies that cruise these very warm waters apprised of their locations...which is probably quite helpful to the pirates, but we'll leave that to one side.

To miss plowing up the Red Sea, however, means likely foregoing visiting the Mediterranean Sea during the voyage, but I would rather face the storms at the south end of Africa than a bunch of ruthless bastards pointing AK-47s at me and my family.

Because the situation is too fluid to predict for us, who are, in fact, planning a five-year circ, I can't say how omitting the Red Sea as a cruising ground will play out, but my thoughts run along these lines if the area is still dangerous by the time we leave the South Pacific.


Provisional Toronto-Toronto Circumnavigation Route

Year 0 (summer prior to leaving): Shakedown cruise to Nova Scotia in the early summer. Deliberately look for heavy weather in my own "home waters", so to speak. Break things. Fix things. See what works, what doesn't, and get needed sea hours for everyone (me, wife, nine to 10 year old son).

Either overwinter in Halifax to dash south in the spring, or return to Toronto to overwinter aboard (while ensuring the "tenant mix" in the house is correct and I don't need to pay for a new roof or plumbing...).

Year 1: Leave either Halifax or Toronto in early June. Head to Western Caribbean before hurricane season spins up. Try to transit Canal into Pacific by September/October.

Head south via Cocos, Galapagos, Marquesas, Cooks, etc. No need to rush.

Year 2: From Fiji or Tonga, head to New Zealand. Probably stop for six months to explore, coastal cruise and haul out for repairs.

Year 3: Australia/PNG/Torres Strait/South Indian Ocean. See Maldives before they sink; consider Sri Lanka. Go in Mauritius or Madagascar, and if able, finish year in Cape Town.

Year 4: South Atlantic Islands...possibly divert to Argentina/Falklands, more likely go Tristan/Ascension, etc. to easternmost Brazil and then into Caribbean for the leisurely look we missed the first time. Haul out in Trinidad.

Year 5: Head north in spring and do a trans-Atlantic circ after "crossing the outbound path" off New York or Halifax. Go to Ireland, Wales (relatives) and then the Bay of Biscay down to Lisbon to show Alex how proper sailing is done (the odd thing is Fred would be about 19 at this point...). Then to Gibraltar, Spain, Madeira, Azores and across the Atlantic to Bahamas and then back north to New York and up the canals to Lake Ontario and home. Inform one set of tenants that it's time to go, and keep the other set for "cash flow".

Year 6: Haul boat, repair, repaint and remove all personal gear and broken hardware. Sail out the St. Lawrence and trans-Atlantic to Europe (France, Holland, northern Germany), where they appreciate steel boats that have done this sort of thing. Sell the boat, return to pay off the mortgage (I may do this ahead of time just to be done with it, but that means relying more on tenants to supply working money), and either retrieve my classic plastic 33 footer currently on loan, or sell it and start shopping for a Lake Ontario cruiser.

Of course, if I can make money while sailing, I might never return. But I'd probably go funny in the head. Some would comment that this entire enterprise is solid evidence that said head is already in sad shape.